Cladding Tiles Collection
As a non-brick cladding, brick cladding is a great way to achieve the beautiful appearance of a brick wall. Brick tile/thin brick/clad tile is an easy-to-install option on both interior and exterior walls. These fast-coloring and low-maintenance bricks are a great way to add to your walls. Get Cladding Bricks from Jindal Mechno Bricks, India’s leading Brick Cladding company.
Features
Features
Easy Installation
Cladding tiles are sometimes preferred over brick as they are laid during renovations.
Evergreen colours
The colors never fade as they are obtained after firing and are the same throughout the thickness of the tile.
Weather proof
Tiles are coated with silicone prior to delivery to the job site to prevent algae deposits and water marks.
Forget about the maintenance
Brickwork never needs paint and is virtually maintenance free
Cladding Tiles Products
Color : Chocolate
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Light Brown
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Terracotta
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Mud
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Beige
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Mud
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Terracotta
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Beige
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Chocolate
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Light Brown
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Mud
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.
Color : Beige
Finish : Plain
Sizes Available
9″x3″×17mm / 9″x2″×17mm
9″x1.5″×17mm / 6″×1″×17mm
.Terracotta
Installation
Spray water on the brick wall to be laid. Wall plastering screed: It can be plastered on the sand wall as 1:1
- plaster the wall and make a leveled surface using a wooden hawk. Make the plaster rough with the help of a broom. Let the plaster settle for 2-3 days and cure as required. Once the plaster is set, spray water on it before starting the tile installation. Use a water pipe to maintain a constant level, mark level on the plaster. Soak the press tiles in a bucket full of water. Extruded tiles do not need soaking. Soak thread in coloured water. Use the marks made with the water level as guidelines to press the coloured thread against the plastered wall. Such imprints can be marked all the way up maintaining the proper height required for cladding tiles and grooves.
- For tile fixing, paste can be made by using cement only. Sand can be added, if desired .Put a layer of this paste on the backside of the tile.
- Use the thread imprints on the plaster as guidelines to maintain the alignment for fixing the tiles. Thump softly to ensure fixing.
- Use a mixture of cement and sand in 1:1 proportion for filling up the grooves. Use a wooden base and bent rod as shown in the picture, after 4-5 hours, once the grooves are dried, extra cement can be brushed off. Spray some water for curing of grooves.
Our brick performs well when left exposed
Factors such as the compressive strength, water absorption, weathering and bending of the bricks are carefully monitored to ensure that our bricks are more efficient when exposed.